If you buy the digimaster III from us in the beginning of 2012 or last year, and if you want to do newer and more cars, you need to buy this tokens to Update your digimaster 3, then you can use it. You can use it on Digimaster 3, CKM100, CKM200, ADM-300A.
Tacho Universal V2008.01 Update& Repair Kit 1.can repair the following troubles: Screen display: Diga update and RESET, 2.No display after powered on, No vehicle list, screen display black strip, Frequently Halting. 3.Screen display both the following: update handheld and the machine cannot read EEPROM.
1.The Tacho Pro software might not work on PC`s that are faster than 233 MHZ. 2.Interface electronic of the Tachopro & K/L is the same, only tachoPro have the dongle inside. 3.Make sure using the Tachopro Software under PLAIN DOS only not under windows or a windows command shell
CAS3/912X/9S12X IN CIRCUIT PROGRAMMER, 1.you don't need to remove the micro from the board.You only connect 7 pins will be ok.2.It connect to PC by USB.3.Support MC912D60 MC912DX128 MC9S12DX64 MC9S12DX128 MC9S12DX256 MC9S12XDX512
This device is a Dash Programmer or ECU Flasher designed for Vehicles using the NEC MCU such as Citroen,Peugeot, Hyundai, Honda, Suzuki, Renault, Opel, Alfa, Chevrolet (please refer to the Applicable Models below) that allows you to modify/reprogram your car’s computer or correct the odometer reading.
Yanhua Digimaster 3 also is called Digimaster III with 980 Tokens or shortly D3 is new developed odometer correction master. It works with various types of adapter you can easily achieve odometer correction, Audio decoding, airbag resetting, engine ECU resetting, IMMO, programming key for Benz & BMW etc.
KM TOOL EDC V1.5 For Opel Read/Write KM Models 1998-2009 Can-bus System1.Software Version: Opel EDC V1.52.Read/Write KM Opel Models 1998-2009 Can-bus System Only3.The software together with interface is designed for changing the state of kilometers in engine controllers EDC16 in OPEL cars.